Microchip / Atmel 256Kb (32KB) I²C Serial EEPROM · 1.7V – 5.5V · SOP-8 / DIP-8 / TSSOP-8 · For drone calibration, config storage
| Номер детали | AT24C256 |
|---|---|
| Производитель | Microchip Technology (formerly Atmel) |
| Type | I²C Serial EEPROM |
| Capacity | 256 Kb (32,768 × 8 bits = 32KB) |
| Интерфейс | I²C (400 kHz / 1 MHz) |
| Page Size | 64-byte page write buffer |
| Напряжение питания | 1.7V – 5.5V (wide voltage) |
| Корпус | SOP-8 (3.9mm), DIP-8, TSSOP-8 |
| Erase/Write Cycles | 1,000,000 cycles per byte |
| Data Retention | 100 years |
| Рабочая температура | −40°C to +85°C |
| Active Current | 1 mA (write), 400 µA (read) |
|---|---|
| Standby Current | 2 µA (typical) |
| Write Cycle Time | 5 ms (page write) |
| I²C Address | 0x50–0x57 (A0, A1, A2 pins) |
| Max Clock | 400 kHz (standard); 1 MHz (FM+ option) |
| SOP-8 PN | AT24C256C-SSHL-T (SOP-8, T&R) |
|---|---|
| DIP-8 PN | AT24C256C-PU (DIP-8) |
| TSSOP PN | AT24C256C-XHL-T (TSSOP-8) |
| Min Order | 1 pc; T&R bulk available |
| Срок поставки | In Stock |
| RoHS | Compliant |
The AT24C256 is a classic 256Kb I²C EEPROM by Microchip (Atmel), used in drone systems for storing persistent calibration data, sensor offsets, flight parameters and configuration values that must survive power cycles. Its wide 1.7–5.5V operation and standard I²C interface make it universally compatible with STM32, ESP32, Arduino and any drone flight controller.
